普通瓶坯模具,自锁可调短浇口模具
自锁可调气封无浇口模具+ 自锁瓶胚模具+ 矿泉水瓶盖模具+ 油瓶易拉盖模具+ 五加仑聪明盖模具+ 热流道瓶盖模具+ 切割瓶盖模具 + 热灌装瓶模具+ 普通瓶模具  + 普通瓶坯模具+ 自锁可调短浇口模具+ 自锁可调气封无浇口模具+ 自锁瓶胚模具+ 矿泉水盖模具+ 油瓶易拉盖模具+ 五加仑聪明盖模具+ 热流道瓶盖模具+ 切割瓶盖模具 + 热灌装瓶模具
1出48切割盖模具 ,1出8五加仑聪明盖模具
,一出60切割盖模具 一出十二热流道易拉盖下盖模具 一出四十热流道瓶盖模具 一出十二热流道易拉盖上盖模具 1出16热流道瓶盖模具 1出14热流道瓶盖模具 1出12热流道瓶盖模具  瓶坯模具 + 普通瓶坯模具+ 自锁可调短浇口模具+ 自锁可调气封无浇口模具+ 自锁瓶胚模具 瓶盖模具 + 矿泉水盖模+ 油瓶易拉盖模具+瓶模具 + 热灌装瓶模具+ 普通瓶模具 日用品模具
赵阳  黄岩博格模具有限公司
地 址： 中国 浙江 台州市黄岩模具西城 ,新城路18 号
邮 编： 318020 
MSN    borgmould2@hotmail.com    EMAIL    borgmould@188.com
  http://hi.baidu.com/plasticmould8/album    http://www.borgmould.com/
      hot runner preform mould
24 cavities pneumatic valve self lock justable preform mould
32 cavities self lock justable preform mould without tail
20 cavities self lock justable preform mould without tail
48 cavities preform mould
8 cavities justable self lock pneumatic valve-type preform mould
cap mould
oil cap mould
16 cavities cap mould
8 cavities clamshell mould
60 cavities cap mould
4 cavities cosmetic bottle cap mould
12 cavities hot runner pull-top cap mould
12 cavities hot runner pull-top cap top cap mould
Self-locked cap mould
Flip-top cap mould
48 cavities hot runner cap mould
8 cavities auto open cap mould
3 cavities hot runner cap mould
6 cavities easy-opne cap mould
blowing bottle mould
Mineral water bottle mould
5 gallom bottle mould
Medicine bottle mould
temperature control box of preform mould
preform mould accessory
MSN    borgmould2@hotmail.com    EMAIL    borgmould@188.com
  http://hi.baidu.com/plasticmould8/album    http://www.borgmould.com/